Well folks the official press release has come out about the Dodge Challenger Super Stock concept of a concept and it’s nothing but spectacular.  The Challenger Super Stock concept was created to commemorate the legendary 392 HEMI that was first introduced in 1957 along with featuring the new 392 HEMI crate motor that Mopar will be unvieling at the SEMA show.  The new crate motor will be available in three different variations: carbureted 540 horsepower and 490 ft-lbs. of torque, EFI 525 horsepower and 510 ft-lbs. of torque as well as a long block HEMI version.  Full specifications along with the official press release and a few more photos on the next page.

Official Press Release:

PRESS RELEASE:

Mopar® Celebrates 50 Years of HEMI® Heaven
with Relaunch of Legendary 392

• The History of the 392 HEMI®
• Dodge Challenger Super Stock Concept with 392 HEMI by Mopar
• 392 Technical Specifications

Center Line, Mich. - Next year marks the 50th anniversary of an engine that revolutionized not only drag racing, but the entire automotive industry as well: The legendary 392 HEMI®. Mention the word “HEMI” to an automotive enthusiast and little else needs to be said. Or, perhaps a lot more needs to be said depending on your perspective.

“The 392 HEMI is a legend so rich in automotive tradition that hundreds, if not thousands, of books and accounts have been written about its historical significance,” said Chris Cortez, senior vice president – Global Service & Parts, Chrysler Group.”

The History of the 392 HEMI
The original 392 HEMI engine was introduced in the new 1957 model year Chryslers and Imperials. It replaced the 354 cubic-inch version of the original HEMI launched in 1951.
Compared with the 354, the 392 was completely revised and improved, with larger valves and ports, a beefier block and crankshaft, and improved bearings. In short, the 392 HEMI, often referred to simply as the “92,” was perfect for drag racing.

More than a few racers bolted on six or eight carburetors, slipped in a hotter cam, tipped some nitro into the tank and went racing. Racing legend Don Garlits ran a 392 in his Swamp Rat I at record speeds of over 180 mph on nitro with no supercharger. Garlits also used a 392 HEMI to officially break the 200-mph barrier when his Swamp Rat went 201.34 mph at Atco, N.J. in 1964.

Dodge Challenger Super Stock Concept with 392 HEMI by Mopar
To further commemorate the legacy of the 392, Chrysler Group and Mopar are unveiling a SEMA first: a concept vehicle tricked out just for SEMA. From Detroit’s 2006 North American International Auto Show and a year before its production debut, the stunning Dodge Challenger Super Stock with 392 HEMI by Mopar.

“There was really only one vehicle choice to showcase our new crate motor-the bold, powerful and capable, Dodge Challenger,” said Cortez.

One of the most iconic muscle cars of the 1970s, it debuted in the fall of 1969 as a 1970 model. Although it was only produced from 1970 to 1974 (188,600 sold), the Dodge Challenger earned a reputation as one of the most desirable of the original “pony cars,” with meticulously restored and rare examples today selling for six-figure prices.

The Challenger went racing in its first year and HEMI-powered Challengers tore up the drag strips across the country in the SCCA Trans-am series and NHRA Pro Stock classes. In 1971, a Dodge Challenger paced the Indianapolis 500.

“The HEMI legacy lives on,” said Cortez. “But this Dodge Challenger Super Stock concept will no doubt bring that legacy to a whole new generation.”

The all-new Dodge Challenger will debut as a 2008 model in calendar-year 2008.

392 Technical Specifications
To help celebrate the 50th anniversary of the legendary engine, Mopar is launching an all-new 392 HEMI crate motor for a new generation of performance enthusiasts. This engine-built with all new components-is a complete engine assembly from the throttle body to the oil pan, and cranks out 525 horsepower in it most potent form.

Three different versions of the new 392 are available from Mopar:
• P5153604 392 HEMI Crate Engine – Carbureted, 540 horsepower and 490 lb.-ft of torque
• P5253605 392 HEMI Crate Engine – SEFI, 525 horsepower and 510 lb.-ft. of torque
• P5153603 392 HEMI Long Block HEMI Crate Engine

Technical specifications include:
• Deep-skirted cast iron block with cross-bolted mains
• CNC-ported aluminum twin-plug cylinder heads
• Stainless steel 2.100″ intake and 1.600″ exhaust valves
• Ovate wire (beehive competition) valve springs
• Viton competition valve stem seals
• 279°/285° hydraulic roller camshaft with 0.584″ intake and 0.552″ exhaust lift
• Forged pistons (4.055″ bore)
• 10.5:1 compression ratio
• Aluminum single plane high rise intake manifold with holley 870 cfm 4-bbl carburetor for carbureted 392 applications (1)
• 4140 forged steel crankshaft - 3.795″ stroke
• 4130 forged- steel I-beam performance connecting rods - 6.200″ length
• SFI-approved competition crankshaft damper
• “Plug-and-Play” wiring harnesses (2)
• 80 mm manual throttle body on fuel-injected engines (3)
• Premium tri-metal performance engine bearings
• Precision balanced rotating assembly
• Distributorless coil-on-plug (COP) ignition system

This entry was posted on Tuesday, October 31st, 2006 at 12:24 am and is filed under General Challenger News. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.